Product Details
Description
The gas zirconia oxygen analyzer is suitable for continuous monitoring of the oxygen content in the flue gas produced by combustion equipment such as boilers and heating furnaces during the combustion process. Meanwhile, the gas zirconia oxygen analyzer can quickly and accurately display, detect, and analyze online to achieve low-oxygen combustion control, achieve energy saving and reduce environmental pollution.
Application
The gas zirconia analyzers are widely used energy-consuming industries, such as:
★ Steel industry
★ Electronic power industry
★ Petrochemical industry
★ Pottery industry
★ Various combustion equipment: incinerators, small and middle boilers, etc.
Main Features
★ Easy Operation Easy to operate by functional key.
★ Easily replaceable zirconia element.
★ IP66 or IP67 enclosure.
★ Fast response.
★ Withstand the pressure of ±8KPa.
Specification
Items |
Specifications |
Oxygen concentration: |
0.001~100 vol% |
Output signal: |
4~20mA DC (maximum load resistance 750Ω) |
Setting range: |
0~20.6 vol% (0~30% can be set) |
Digital communications: |
Support Modbus 232/485 and Ethernet (selectable) |
Heating time: |
Approx. 20 min. |
Repeatability: |
±0.5vol% maximum value of set range. |
Zero drift: |
1.5 vol% maximum value of set range (60 days) |
Response time: |
Response of 90% within 5 seconds. (Measured after gas is introduced from standard gas inlet and oxygen signal starts changing). |
Power supply: |
220±10%VAC |
Installation: |
Flange mounting |
Limit output: |
Provide settable upper and lower limit outputs (optional) |
Temperature control accuracy: |
0~700℃ (Floating temperature calculation) |
Equipment system accuracy: |
±1%F.S. |
Digit display mode: |
4 bit LED nixie tube display |
Operation: |
Menu button operation |
Calibration operation: |
Three parameters on-line calibration |
Equipment power: |
Approx. 10W (Excluding heating power) |
Heating power: |
50W (average), able to supply maximum 150W power output |
Environmental conditions: |
Ambient temperature 0~70℃, relative humidity ≤ 90% |
Detector length:
180mm\400mm\600mm\800mm\1000mm\1200mm\1500mm (customizable)
(Note: Detector length is from the detector tip to flange)
http://www.wslinstrument.com/